This page lists information on maintaining the 2008 Charter Table of Specifications.
Each module advocate needs to fill out the following information:
===== Specification Name =====
; Latest Working Draft : pasteURLhere
; Advocate : Your Name Here
; Description : Describe here what it is.
; Status : Explain current status, expected next status, how big of a project it is.
; Implementations : Explain current status and expectations.
; Test Suite : Explain current and expected status, how big of a project it will be.
; Blocked by : Explain anything that is blocking progress.
; Rationale : Explain why we want this, why it is important.
The CSSWG's current work page is a good starting point. fantasai's article on specification stages might be helpful for describing status. It defines the following stages:
- Exploring
- In this stage the spec is often incomplete, possibly changing greatly between drafts, and possibly including many features that will be dropped as the module matures.
- Rewriting
- Some modules enter this stage, where large parts of the spec are rewritten.
- Refining
- At this point the spec is mostly complete and the scope of its functionality is well-defined, but the spec still needs several cycles of publishing, review, and revision to uncover issues and resolve them.
- Stabilizing
- At this point the spec is almost stable enough for CR, but still needs some well-defined changes from e.g. last-call comments, or general minor polishing.
- Call for Implementations
- At this point the WG believes the specification to be complete and precise enough to be implemented, and by transitioning it into the CR status has issued a call for implementations and test cases.
- Recommended / Stable
- Although the test suite and implementation reports may not be done yet and there may still be a few minor issues left, at this point the WG has enough implementation experience that it considers the spec ready for wide use.
If your spec has a test suite, you can use these release phase definitions to describe its status, reproduced below:
- Final
- Test suite is complete with no known or suspected bugs. At least two implementations pass, and the specification has reached Recommendation status.
- Release Candidate
- Test suite is complete with no known or suspected bugs. At least one implementation passes almost all tests.
- Beta
- Test suite has complete coverage of the spec. It may have some bugs but is expected to be mostly reliable. At least one implementation passes a majority of the tests.
- Alpha
- Test suite has complete if not thorough coverage of the spec, but is expected to require some revision.
- Pre-Alpha
- Test suite is incomplete and/or known to contain bugs at time of publication.